1.27×2.54mm Straight Ejector Header

Product Name:1.27×2.54mm Straight Ejector Header The Ejector Header is usually a head-shaped plastic similar to that of an animal cow with a square pin composition. The difference between the Ejector Header Connector is the simple bullhorn more snaps on both sides. According to demand, the outer dimensions of the Ejector Header Connector commonly used 1.27 pitch, 2.0 pitch, 2.54 pitch three specifications; according to the different pitch, the diameter of the four-sided row of pins used also changed accordingly. The bottom contact surface with the PCB board can be designed for SMT chip type or DIP direct insertion 180 degrees. Role: After welding the bullhorn on the PCB board, connect the corresponding specifications of the IDC row of wires, and then with another circuit composed of the designer's needs to achieve the circuit connection, usually used to transmit control signals and weak currents. Ejector Header Connector is a connector in a large category, because of its s…

Ejector Header Connector Female Header Connector Pin Header Connector Automotive Connectors