DTH drill bits face shape selection:1. Drop Center BitFor high penetration rates in soft to medium hard and fissured rock formations. Low to medium air pressures. Maximum hole deviation control.2. Concave FaceThe all-round application bit face specifically for medium hard and homogenerous rock formations. Good hole deviation control and good flushing capacity.3. Convex FaceFor high penetration rates in soft to medium-hard with low to medium air pressures. It is the most resistance to steel wash, and may reduce the load and wear on the gauge buttons, but poor hole deviation control.4. Double Gauge FaceThis kind of face shape is suitable for fast penetration rates in medium to hard rock formations. Designed for high air pressures and good resistance to steel wash step gauge bit.5. Flat Face BitThis kind of face shape is suitable for hard to very hard and abrasive rock formations in applications with high air pressures. Good penetration rates an resistance to steel wash. 6. Except for DT…

Similar

165mm Drill Bit for GK50 DTH Hammer
Hard Rock Button Bits 45mm SR35 for Mining
Normal Body Drop Center 76mm T45 Button Bits
XTC GD40 down the hole hammer
Coal Mining picks,coal bits
U85 S19 Coal Mining Bits Drum Cutters Picks
U85 M19 Coal Mining Bits Drum Cutters Picks
Coal Mining Machinery, Coal Picks Coal Mining Picks
U47 M19 Coal Picks Coal Mining picks
U47 Z19 Coal Picks Coal Mining picks
R32-T38 Top Hammer Button Bits Drill Rods
Rock drilling tools, tunnel digging,

Luoyang Golden Egret Geotools co., Ltd.

Luoyang Golden Egret Geotools Co., Ltd. is a global leading manufacturer of rock drilling and earth…

Copyrights © 2025 astszcmparts.com All Rights.Reserved .