Intended Use
The
reagent is used to detect the FSH in urine qualitatively. Test results
are read visually without the need for any instrument.
Test Procedure
Instructions
must be read entirely before taking the test. Allow the test device
controls to equilibrate to room temperature for 30 minutes (20℃-30℃)
prior to testing. Do not open the inner packaging until ready, it must
be used in one hour if opened (Humidity: 20%~90%, Temp: 10℃-50℃)
Strip:
1. Remove the test device from the sealed pouch, put the end of the test
strip print with arrow into the urine, the interface of urine should
not exceed the max line, take it out and place the test device on a
clean and level surface after 3 seconds.
2. Observe the test results immediately wi…