High gloss ABS plastic raw material

ABS Zhenjiang Chi Mei PA-757K processing conditions 1:ABS resin is an amorphous amorphous polymer, with excellent molding processing conditions as polystyrene. 2:ABS resin has good processing properties, can be used injection molding, extrusion, calendering, blow molding, foaming and vacuum forming of the general process processing, but also can be cold forming process. 3: Generally commonly used injection molding process conditions: 4: Select the appropriate runner and gate according to the fluidity (generally 2.8mm30.mm). 5: Select the appropriate fusion state corresponding to the gate position (generally, the mold gate is 305mm-4.0mm). 6: Due to high pressure molding, the retreat tilt must be more than 2 degrees. 7: The forming shrinkage rate must be about 0.5%. 8:ABS is often used in gold-plated products, precautions are as follows 1) The temperature of the material pipe should be high, about 210~230 degrees Polyformaldehyde 2) The injection temperature should be slow (with th…

General Grade Polystyrene AS Resin PC Or ABS Polycarbonate Abs Plastic